Product Overview
Banner K30 Pro Multicolor Dome Indicator - IO-Link Controlled, IP67/IP69K, M12 QD
Condition
Unused NOS. Outer cardboard box shows light creasing and shelf wear; internal contents are clean and pristine. Includes mounting hardware and instruction sheet. Markings legible on body: K30PLKQ, 18-30 V dc, 33mA max, TYPE 4X 13. Label confirms part 809275, EID 3809275, CE marked, assembled in the USA. M12 connector contacts clean, no corrosion or bent pins. Acquired from a contract manufacturer clearing surplus stock.
Same or next business day shipping from our Idaho warehouse. Honest pricing, no nonsense.
Online since 1999. We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
Banner Engineering K30PLKQ - K30 Pro Series 30mm programmable multicolor RGB indicator with IO-Link control. The K30PLKQ connects to an IO-Link master via a 4-pin M12 Euro quick disconnect and delivers operator-readable status in any RGB color combination. Rated IP67 and IP69K for washdown environments. Polycarbonate dome housing with M22 x 1.5 mounting thread. Assembled in the USA.
Key Features
- IO-Link communication protocol - full color and animation control via IO-Link master or Banner Pro Editor software
- RGB multicolor programmable dome - any color combination configurable per application
- Supply voltage: 18-30 V dc, 33 mA max
- Environmental rating: IP67 and IP69K, Type 4X / Type 13 - washdown rated
- 4-pin M12 Euro integral quick disconnect connector
- M22 x 1.5 mounting thread, base-mount dome window style
- 30mm illuminated dome, polycarbonate housing
- CE marked, assembled in the USA
- Includes mounting hardware and instruction sheet
Applications
- Maintenance technician wiring the K30PLKQ to a PLC to show machine state at a glance - green for run, yellow for standby, red for fault - without adding multiple discrete indicator lights to the panel
- OEM design engineer integrating the indicator into new equipment where a single IO-Link device replaces several wired signal lamps, reducing cabinet wiring and enabling remote parameter changes without touching hardware
- Pick-to-light assembly line where the dome color guides operators through sequential build steps, changing state as each task is confirmed by the control system
- Replacement for a failed K30PLKQ on an existing machine - same part number, same M12 cordset, same mounting hole, drop-in swap with no rewiring
- Makers and lab builders experimenting with IO-Link using a Banner IO-Link master dev kit - the K30PLKQ makes a vivid, real-hardware output node for learning IO-Link parameterization and IODD configuration
Frequently Asked Questions
What do I need beyond this indicator to make it work?
Power supply: 18-30 V dc. Connection: an M12 4-pin cordset (not included). For full RGB color and animation control, an IO-Link master is required. Banner's Pro Editor software with a Pro Converter Cable can also be used for standalone configuration without a live IO-Link master on the network.
Is a cordset or cable included?
Not included. The indicator ships with mounting hardware and an instruction sheet. An M12 4-pin cordset must be sourced separately.
Can this be used in a washdown or food-processing environment?
Yes. The K30PLKQ is rated IP67 and IP69K and carries a Type 4X / Type 13 environmental rating, making it suitable for washdown applications.
Is this compatible with safety or personnel-protection circuits?
No. The K30PLKQ is a status indicator only. It is not rated or certified for personnel protection applications and must not be used as a safety device.
What is the part number 809275 on the label?
809275 is Banner Engineering's internal catalog identifier for the K30PLKQ. Both numbers appear on the factory label and refer to the same part.
The outer box took a few bumps on its way through the supply chain - the indicator inside never did. If you need a Banner K30 Pro on your machine today, this one is ready to go.
