Product Overview
2200 pF 100 V X7R Axial Ceramic Capacitor, 5% Tolerance, SpinGuard SA10 Conformally Coated Body
Condition
Unused new old stock (NOS). Sold each.
Ships same or next business day from our Idaho warehouse. Honest pricing, no nonsense.
Online since 1999. A no-hassle satisfaction guarantee on every order.
Product Overview
SA101C222JAA is a 2200 pF multilayer ceramic capacitor from AVX's SpinGuard SA line: X7R dielectric, 100 V DC rating, 5% tolerance, in a small conformally coated axial body.
Key Features
- Capacitance: 2200 pF (2.2 nF, 0.0022 uF)
- Voltage rating: 100 V DC
- Dielectric: X7R
- Tolerance: +/-5% (J)
- Case: SA10, 4.32 mm long, 2.54 mm diameter
- Construction: conformally coated multilayer ceramic with axial wire leads
Applications
- Bypassing a supply pin or shunting RF hash to ground on a point-to-point, turret-board or perfboard build.
- Replacing a 2200 pF (222) axial ceramic on a through-hole board where the original ran at 100 V or less.
- Breadboard prototyping, where the long axial leads span a row of tie-points.
Frequently Asked Questions
What do the codes in SA101C222JAA stand for?
In AVX's SA ordering code, SA10 is the case size, 1 is 100 V, C is X7R, 222 is 22 followed by two zeros in picofarads (2200 pF), and J is 5% tolerance.
Is X7R a good choice for a timing or oscillator position?
Not for a precision one. X7R capacitance moves with temperature and applied voltage, so it suits bypass, coupling and general filtering. Timing and oscillator positions usually call for C0G.
Will it fit a board drilled for a radial ceramic?
Yes, mounted upright: bend one lead back down along the body so both leads drop into the pair of holes.
Order more and each piece costs less - the price-break table on this page spells it out.
SpinGuard is the name AVX gave its coated axial ceramics, a tan jacket around a multilayer chip with a wire out of each end. On a turret board it spans two posts by itself: trim the leads to the gap and solder both ends.
