Product Overview
Chemtronics Oxygen-Free Copper Rosin Flux Solder Removal Wick
Condition
Unused new old stock (NOS). Sold each as an individual 12-inch cut length. Markings legible: CHEM-WIK LITE 10-25L .100 in. 12 inches.
Same or next business day shipping from our Idaho warehouse. Reliable parts since 1999. Honest pricing, no nonsense.
We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
Chemtronics Chem-Wik Lite 10-25L is an oxygen-free copper desoldering braid designed for fast thermal transfer and clean solder absorption. Coated with non-corrosive, halide-free Type R rosin flux, this 0.100-inch wide braid quickly wicks solder away from circuit board pads and through-hole connections without damaging surrounding traces.
Key Features
- High-purity, oxygen-free copper braid for rapid heat conduction
- 0.100 in. (2.54 mm) width suited for medium-to-large solder pads and terminal lugs
- Pre-fluxed with non-corrosive Type R rosin flux
- 12-inch pre-cut length for benchtop repairs and field toolkits
- Meets MIL-F-14256F Type R and ANSI/IPC J-STD-004 Type ROL0 standards
Applications
- Clearing solder bridges and cleaning surface-mount pads during PCB assembly or rework
- Desoldering through-hole switches, potentiometers, and IC sockets from vintage amplifier and synth boards
- Removing excess solder on terminal strips and point-to-point wiring projects
Frequently Asked Questions
What joint sizes does the 0.100-inch width work best on?
At 0.100 inches (2.54 mm wide, standard Size #4), this braid covers medium-to-large PCB pads, through-hole component leads, terminal lugs, and connectors where narrower wick saturates too quickly.
Does the flux residue require cleaning after desoldering?
Chem-Wik Lite uses Grade WW, Type R rosin flux, which is non-corrosive and non-conductive. Residue does not damage boards if left in place, though it can be cleaned off with standard flux remover or isopropyl alcohol if an unblemished cosmetic finish is needed.
Can this rosin-fluxed copper braid be used with lead-free solder?
Yes. The oxygen-free copper braid transfers heat rapidly enough to melt higher-melting lead-free alloys, though adding a touch of fresh solder to the iron tip helps establish thermal bridge contact. The price per piece drops at each step in the price-break table on this page.
Few bench tools save more traces than high-purity copper braid when an iron dwells a second too long. Keep a foot of wick in your kit and clean the pads right the first time.