Product Overview
Panduit TWR-C0 Wire Retainer Clips - Factory Bag of 100 in Weather Resistant Black Nylon 6.6
Condition
New, in the original Panduit packaging. The photographed pack is a clear zip-top bag with the factory label intact: Panduit logo, MADE IN USA, 100 PC, BLACK, the part number TWR-C0, a UL Recognized Component mark, and the printed lines BUNDLE RANGE .375IN. and SIZE (WXL) .38IN. X 1.44IN. The teal header band on that bag carries the code 105N61 and the label is stamped QC #: 602X0656F. One bag is shown poured out on the shop plate so the clip itself can be seen: the pieces are uniform matte black with no dirt, cracks, or crushed arches, the PANDUIT name is molded into the top of every clip, and the single screw hole in each mounting tab is clean and unmarked by a fastener.
Same or next business day shipping from our Idaho warehouse. Honest pricing, no nonsense.
Online since 1999. We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
The TWR-C0 is Panduit's one-piece wire retainer clip: a molded nylon 6.6 saddle that arches over a wire or a small bundle and lands on a flat tab with one screw hole, so a single fastener pins the run to a backplate, stud, or chassis wall. The bag label supplies the working numbers - a bundle range of .375 in (9.5 mm) with a clip footprint of .38 in wide by 1.44 in long - which suits one heavier conductor, a jacketed pair, or a small tie-wrapped group. The material is the weather resistant nylon 6.6 grade in black, and every clip carries the molded PANDUIT marking visible in the close-up photos, so the hardware is still identifiable years after the job is buttoned up. One unit here is one factory bag of 100 pieces. No screws are included; the photos show clips only, and the label does not print a hole diameter, so size your fasteners against the clip.
Key Features
- Manufacturer part number: Panduit TWR-C0
- Bundle range: .375 in (9.5 mm), printed on the factory label
- Clip size (W x L): .38 in x 1.44 in, printed on the factory label
- Material: weather resistant nylon 6.6
- Color: black
- Mounting: flat tab with one screw hole, one fastener per clip
- Marking: PANDUIT molded into the arch of every clip
- Quantity: 100 pieces, one factory bag per unit
- Origin: MADE IN USA, printed on the bag label
- UL Recognized Component mark printed on the bag label
- Screws not included; screw hole diameter not confirmed - check the clip against your hardware before ordering fasteners
Applications
- A panel builder dressing a control cabinet, holding single conductors off the backplate at even intervals instead of letting them float behind the DIN rail
- An auto, truck, or marine electrician re-running a harness along a frame rail or bulkhead, where every anchor point gets a screw rather than an adhesive base
- A maintenance tech swapping out brittle, sun-baked clips on an older machine and wanting the replacements to look and mount like the originals
- A low-voltage installer routing cable through a shop, barn, or outbuilding who would rather stock one bag of clips than a fistful of mismatched saddles
Frequently Asked Questions
What size wire or bundle will the TWR-C0 actually hold?
The factory label states a bundle range of .375 in (9.5 mm), and the clip body measures .38 in wide by 1.44 in long by that same label. Anything appreciably larger than 3/8 in will not seat under the arch. No minimum is printed, so on very thin single wire expect some play unless you shim it or double the wire back.
Are mounting screws included?
No. The label counts 100 PC and nothing else, and the photos show clips only. Each clip takes one screw through the flat tab. The label does not give a hole diameter and we have not measured it, so check the hole against your own hardware before you buy fasteners.
What does the weather resistant nylon 6.6 claim cover?
Nylon 6.6 is the tough engineering grade used throughout cable management hardware, and this part is the weather resistant black version. Temperature and UV ratings are not printed on the bag and we have not tested them here, so if the run sits in direct sun or lives outdoors year round, verify the TWR-C0 numbers against the Panduit datasheet before use.
What exactly arrives, and why does one bag look open in the photos?
One unit is one Panduit bag of 100 clips with the printed factory label, as shown in the first photo. A bag was poured out on the bench so the individual clip, the molded PANDUIT lettering, and the screw tab could be photographed from several angles - that is the photography, not the product's history.
Why buy a single bag of 100 here instead of a carton from a distributor?
Because most jobs call for a drawer's worth of clips, not a pallet's. One unit here is one factory-labeled bag of 100, enough to dress a full control panel or a truck harness and still leave spares in the bin, and you can take a single bag or a few without clearing anybody's carton minimum. The count, the part number, and the country of origin are all printed on the label you can see in the photos. Shipping is a flat $8, free once your order passes $28, and orders leave our Idaho warehouse the same or next business day.
Nobody ever admired a wire clip, and that is the whole point - a hundred of these vanish into a panel and the wiring behind them suddenly looks like somebody meant it. Screw them down and let the harness take the credit.
