Product Overview
Xicon 271 Series 10 kΩ 0.25W Precision Through-Hole Resistors
Condition
Unused new old stock (NOS). Straight, untrimmed axial leads with clean solderable plating. Five-band color code remains sharp and distinct on the light blue epoxy coating. Sold each.
Same or next business day shipping from our Idaho warehouse. Reliable parts since 1999. Honest pricing, no nonsense.
We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
Xicon 271-10K-RC precision metal film resistor designed for stable through-hole circuit assembly. Built on a ceramic core with a vacuum-deposited metal film layer and protective epoxy coating, providing tight tolerance and low thermal noise across demanding analog and digital circuits.
Key Features
- 10 kΩ resistance with ±1% tolerance
- 0.25 W (1/4 watt) power rating at 70°C
- 250 V maximum working voltage
- ±50 ppm/°C temperature coefficient of resistance
- -55°C to +155°C operating temperature range
- Standard five-band EIA color coding on light blue body
- Tinned axial leads for through-hole PCB insertion or breadboarding
Applications
- Populating audio preamps and synthesizer boards where low noise and stable resistance prevent signal drift.
- Building precision voltage dividers and sensor pull-ups in microcontroller and robotics projects.
- Replacing aged or drifting carbon film resistors during vintage test equipment and amplifier bench repairs.
Frequently Asked Questions
What do the five color bands indicate?
The color bands read brown (1), black (0), black (0), red (multiplier ×100), and brown (±1% tolerance), confirming a 10 kΩ value with 1% accuracy.
Can this replace a standard 5% carbon film 10k resistor?
Yes. A 1% metal film resistor drops directly into circuits designed for 5% carbon film resistors of the same 1/4-watt rating, offering tighter tolerance and lower thermal drift. The price per piece drops at each step in the price-break table on this page.
Every breadboard needs a dependable 10k pull-up, and metal film keeps your circuit steady right where you set it. Solder it into place and let the board do its job.