Product Overview
Tescor SAFTI-STROBE Model 200 – 12VDC Red Xenon Safety Beacon, 360° Coverage, Mount-Ready
Condition
Unused NOS. Unit is clean and intact with no signs of previous installation. Red ribbed Lexan lens and black ABS base show no wear or damage. Box, instruction sheet, and four mounting screws with nuts are included. Serial number 100111 on base label; box label confirms SAFTI-STROBE 200, 12VDC, RED. Assembled in USA stamp visible on base. Sourced from a government research facility. Evaluation: Visual inspection only. Function testing not performed.
Ships same or next business day from our Idaho warehouse. Honest pricing, no nonsense.
Online since 1999. We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
Tescor's SAFTI-STROBE Model 200 is a compact 12VDC xenon strobe beacon built in the USA for high-visibility safety signaling. The red Lexan polycarbonate lens delivers 360° coverage, and the ABS base mounts directly to a standard 4-inch electrical box. A 12-inch pre-attached wire lead simplifies hookup to any 10–16VDC circuit.
Key Features
- Operating voltage: 10–16 VDC (nominal 12V)
- Current draw: 0.35 A average
- Flash rate: 70 flashes per minute
- Red Lexan polycarbonate lens with UV protection and RFI shielding
- ABS plastic base – mounts to standard 4-inch electrical box
- 12-inch pre-attached wire lead
- Dimensions: 4.42-inch diameter × 2.75-inch height
- Weight: 0.48 lb
- Assembled in USA
Applications
- Maintenance tech replacing a failed strobe on a forklift or pallet jack before the next shift starts
- Vehicle upfitter wiring a warning beacon into a service truck's 12V circuit for roadside or worksite visibility
- Facilities manager mounting a visual alarm at a loading dock door where noise makes audible alerts unreliable
- Safety coordinator wiring a temporary strobe into a drill setup to simulate active hazard conditions for emergency response training
- Maker or prop builder adding a realistic industrial warning light to a project, haunted attraction, or studio set that runs on 12V power
Frequently Asked Questions
Will this work on a 24VDC system?
No. This unit is the 12VDC variant, rated for 10–16VDC. Applying 24VDC will damage it. Tescor offered a separate 24VDC Model 200 variant rated for 20–28VDC – confirm your system voltage before ordering.
What mounting hardware is included?
Four zinc-plated machine screws with nuts are included, along with a printed instruction sheet. The base is designed to mount to a standard 4-inch electrical box.
Is the lens color confirmed?
Yes. Box label, base label, and the lens itself all confirm red. The Model 200 was offered in multiple lens colors; this unit is red.
Is this a xenon strobe or an LED?
Xenon strobe tube. The SAFTI-STROBE Model 200 uses a xenon flash tube, not an LED array.
A xenon strobe that spent its life on a shelf instead of a loading dock – lens still clean, hardware still bagged, instruction sheet still crisp. Whoever mounts this next gets a fresh start on a proven signal.
