Product Overview
SMC SY7000-27-2T Subplate - 3/8 NPTF Base-Mount Interface for SY7000 Series Pneumatic Valves
Condition
Unused NOS. Sourced from a contract manufacturer clearing surplus stock. Original bag sealed, as confirmed by visual inspection. Photos show the specific unit you will receive - cast aluminum body with three top ports, mounting holes at each corner, black gasket layer on underside, and SMC label reading SY7000-27-2T with secondary code SY7K-R07, made in Japan.
Ships same or next business day from our Idaho warehouse. Reliable parts since 1999. Honest pricing, no nonsense.
We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
SMC SY7000-27-2T subplate for base-mounted SY series solenoid valves. Provides the mounting interface and pneumatic porting for SY7000 series directional control valves - specifically the 3/8 NPTF port variant. Accepts compressed air supply and exhaust connections and passes flow through to the valve mounted on top. Compatible with SY7*40 valves. Manufactured in Japan.
Key Features
- Port size: 3/8 inch NPTF
- Piping type: base mounted
- Compatible with SMC SY7000 series solenoid valves (SY7*40)
- Three top ports visible on body; black gasket layer on underside for sealed valve interface
- Cast aluminum body with corner mounting holes for panel or frame installation
- Secondary code SY7K-R07 per label
- Made in Japan
Applications
- Maintenance technician swapping a damaged subplate on a pneumatic actuator circuit - remove the old base, mount this one to the panel, reconnect the 3/8 NPTF air lines, and reinstall the SY7000 valve to restore directional control without modifying surrounding plumbing
- Machine builder incorporating an SY7000 valve into a new automated assembly line - mount this subplate to the machine frame first, run the air supply and exhaust lines to the NPTF ports, then drop the solenoid valve onto the base for a clean, serviceable installation
- System integrator building a valve station for controlling pneumatic cylinders or grippers - use this subplate as the fixed plumbing point so the valve above it can be swapped during future maintenance without disturbing the air lines
- Makers and prototypers building pneumatic motion systems who want a standardized SMC mounting base rather than fabricating a custom adapter block
Frequently Asked Questions
Which SMC solenoid valves mount to this subplate?
The SY7000-27-2T is compatible with SMC SY7000 series solenoid valves, specifically the SY7*40 valve family. It is not compatible with SY3000, SY5000, or SY9000 series valves, which use different mounting patterns and port sizes.
What port size and thread type does this subplate use?
3/8 inch NPTF. Verify that your pneumatic plumbing uses 3/8 NPTF fittings before ordering. If your system uses 1/4 inch ports, the SY7000-27-1T is the correct variant.
Is the solenoid valve included?
No. This listing is for the subplate only. The SY7000 series solenoid valve mounts separately onto this base.
What does the secondary code SY7K-R07 on the label indicate?
SY7K-R07 appears on the SMC label on this specific unit alongside the primary model number SY7000-27-2T. It is an SMC internal catalog or configuration reference. Both codes identify the same part.
The subplate is the part nobody orders until they need it urgently - and then they need it yesterday. This one is sealed, unused, and ready to drop into a system that has been waiting long enough.
