CTS 761-3-R470 470 Ohm 16-Pin DIP Isolated Resistor Network New

CTS 761-3-R470 16-Pin DIP 8-Resistor Array 470 Ω

Condition

New condition. Unused component with straight through-hole leads. Markings stamped on top surface: CTS9322 761-3-R470.

Same or next business day shipping from our Idaho warehouse. Reliable parts since 1999. Honest pricing, no nonsense.

We are here for our customers, with a no-hassle satisfaction guarantee.

Product Overview

CTS 761-3-R470 is a 16-pin dual in-line package (DIP) resistor network containing 8 isolated 470-ohm thick-film cermet resistors. Engineered to conserve circuit board area, it replaces eight separate through-hole resistors in line termination, pull-up, and current-limiting layouts.

Key Features

• 470 ohm resistance per element with ±2% tolerance
• 8 isolated resistors wired across opposing pin pairs (pins 1-16 through 8-9)
• 300 mW power rating per resistor element with a 2.25 W total package rating at 70°C
• Standard 16-pin DIP through-hole footprint with 0.100-inch lead pitch and 0.300-inch row spacing
• 100 V maximum working voltage and ±100 ppm/°C temperature coefficient
• Thick-film cermet construction rated for operation from -55°C to +125°C

Applications

• Replacing failed termination or pull-up arrays during legacy digital logic and industrial controller board service
• Simplifying LED current-limiting banks on standard 0.100-inch pitch breadboards and maker prototyping shields
• Tidying data bus line conditioning on custom microprocessor and retro-computing builds

Frequently Asked Questions

How are the eight internal resistors routed across the 16 pins?

This network uses CTS schematic 3, providing 8 electrically isolated resistors. Each element connects directly between opposing pins: 1-16, 2-15, 3-14, 4-13, 5-12, 6-11, 7-10, and 8-9.

What are the power and voltage limits for this network?

Each individual resistor is rated for 300 mW (0.3 W) continuous dissipation up to 70°C, with a package maximum of 2.25 W and a 100 V operating limit.

Can I purchase just the exact count needed for a bench repair without buying a whole reel?

Yes. Parts are sold individually so you can order the exact piece count your project requires without paying for excess tape-and-reel stock. Orders ship for an $8 flat rate, ship free once the cart passes $28, and leave our Idaho warehouse the same or next business day.

Eight clean 470-ohm lines in one DIP-16 footprint - solder it in place and put that handful of loose axial resistors back in the drawer.