Product Overview
Xicon 47k Ohm Carbon Film Resistor - 1/8W, 1% Tolerance, 50 PPM, RoHS, Bag of 200
Condition
Unused NOS. Bag of 200 resistors sourced from an electronics distributor consolidating inventory. Factory label confirmed: P/NO 270-47K-RC, WATT 1/8W, VAL 47K, TOL 1%, PPM 50, LOT# R7090010, RoHS Compliant, XICON. Blue axial-leaded bodies with straight, unformed leads and legible 5-band color coding.
Ships same or next business day from our Idaho warehouse. Honest pricing, no nonsense.
Online since 1999. We are here for our customers, with a no-hassle satisfaction guarantee.
Product Overview
Xicon 270-47K-RCV carbon film resistors, 47k Ohm, 1/8W (0.125W), 1% tolerance, 50 PPM/°C temperature coefficient. Axial-leaded, through-hole package. RoHS compliant. Sold as a bag of 200 units.
Key Features
- Resistance: 47k Ohm
- Power rating: 1/8W (0.125W)
- Tolerance: 1%
- Temperature coefficient: 50 PPM/°C
- Type: Carbon film, fixed
- Package: Axial-leaded, through-hole
- RoHS compliant
- Quantity: 200 units per bag
- 5-band color code: Yellow, Violet, Black, Red, Brown
Applications
- Inserting into a breadboard to prototype a current-limiting stage or voltage divider before committing to a PCB layout
- Soldering onto perfboard or a custom PCB as a pull-up or pull-down resistor in an Arduino or Raspberry Pi project
- Replacing a burnt or out-of-spec resistor on a consumer electronics board - radio, amplifier, or vintage audio equipment - during a bench repair
- Stocking a parts drawer for the repair shop that reaches for a 47k value several times a week and hates running short mid-job
- Integrating into small-batch OEM builds for signal conditioning, voltage division, or current limiting in non-critical circuit sections
Frequently Asked Questions
What is the quantity included?
200 resistors per bag, as labeled on the factory bag.
Are these through-hole or surface-mount?
Through-hole, axial-leaded. Leads are straight and unformed, ready for breadboard or PCB insertion.
Is 1/8W sufficient for general hobbyist and repair use?
For most signal-level circuits, voltage dividers, pull-up/pull-down networks, and LED current limiting at low voltages, 1/8W is adequate. Verify the power dissipation in your specific circuit before use.
Are these RoHS compliant?
Yes. RoHS compliance is confirmed on the factory label.
A bag of 200 means you stock up once and stop hunting for a 47k every time a repair calls for one. Blue bodies, straight leads, ready to work - the bench stays moving.
