Product Overview
Murrelektronik MIRO 6.2 Interface Output Relay - 24VDC Coil, 6A SPDT, Spring-Clamp, DIN Rail Mount
Condition
Single unit available. Unused NOS - factory-sealed in original poly bag. Photos show the specific unit you will receive. The bag has visible creasing and minor wrinkling but is intact and sealed. The relay body, green LED indicator windows, spring-clamp terminals, and DIN rail feet are all visible through the packaging and appear undamaged. Art. No. 6652000 and certification marks (CE, UL, CCC, IP20) are legible on the label. Sourced from an electronics distributor consolidating inventory.
Ships same business day from Idaho. Packed carefully.
Backed by our guarantee.
Product Overview
Murrelektronik 6652000 is a slim interface output relay from the MIRO 6.2 series - a line built specifically for space-constrained control cabinet installations. At 6.2 mm wide, it mounts on a standard 35 mm DIN rail and accepts wiring through vibration-resistant spring-clamp terminals. The coil runs on 24 V DC at 14 mA, making it compatible with standard PLC output cards. The single change-over (SPDT) contact switches up to 6 A at 250 V AC/DC - up to 1500 VA or 120 W - providing reliable electrical isolation between low-voltage control circuits and higher-power loads. A green LED status indicator confirms coil energization at a glance. Mechanical life is rated at 20,000,000 cycles. Marked CE, UL, CCC, and IP20.
Key Features
- Series: MIRO 6.2 - 6.2 mm slim profile for dense DIN rail layouts
- Coil voltage: 24 V DC, 14 mA current consumption
- Contact configuration: 1 Change-Over (SPDT - 1 NO / 1 NC)
- Switching capacity: 6 A at 250 V AC/DC - up to 1500 VA / 120 W
- Connection: Spring-clamp terminals for vibration-resistant, tool-free wiring
- Mounting: Standard 35 mm DIN rail
- Status indicator: Green LED confirms coil energized
- Mechanical life: 20,000,000 cycles
- Certifications: CE, UL, CCC - IP20 rated
- Made in Czech Republic
Applications
- PLC output signal amplification and electrical isolation in industrial control panels
- Switching motors, pumps, compressors, solenoids, and lighting circuits from low-voltage control systems
- Conveyor systems, industrial refrigeration, and process control automation
- Control cabinet builds where DIN rail space is limited and slim relay modules are required
- Makers and builders using 24 VDC control logic to switch AC loads in custom automation rigs, CNC control panels, or shop equipment
Frequently Asked Questions
What coil voltage does this relay require?
24 V DC. Current consumption is 14 mA. Verify your PLC or control system output matches this voltage before ordering.
What is the maximum load this relay can switch?
6 A at 250 V AC/DC. Maximum switching capacity is 1500 VA (AC) or 120 W (DC). Do not exceed these ratings - operating above the contact ratings can damage the contacts.
What contact configuration does the 6652000 use?
1 Change-Over - SPDT, with one normally open and one normally closed contact. If your application requires DPDT or a different configuration, verify before ordering.
Does it require a special mounting rail?
Standard 35 mm DIN rail. No special hardware required beyond the rail itself.
Is a manual or datasheet included?
Not included. A multilingual safety-warning insert is visible in the packaging. Murrelektronik datasheets for the MIRO 6.2 series are available through industrial component distributors and documentation archives.
Is the relay tested or function-verified?
Evaluation: Visual inspection only. Function testing not performed. The unit is factory-sealed unused - it has not been installed or powered.
A relay this slim used to be the hard part of a tight panel build - finding one unused, still sealed, with the certifications intact is the other hard part. This one checks both boxes.
