Product Overview
Laube 2A332JT Radial Mylar Film Capacitor 3300pF 100V 5% Through-Hole Tone Cap
Condition
Unused NOS stock sourced from an electronics distributor consolidating inventory. Evaluation: Visual inspection only. Function testing not performed. Leads intact, no visible damage.
Ships same business day from Idaho. Packed carefully.
Product Overview
Laube Technology 2A332JT radial lead polyester film capacitor. Rated 3300pF (3.3nF / 0.0033µF) at 100V DC with 5% tolerance. Through-hole, radial mount. The "2A" prefix designates the 100V voltage class; the "J" suffix confirms 5% tolerance.
Key Features
- Capacitance: 3300pF (3.3nF / 0.0033µF)
- Voltage rating: 100V DC
- Tolerance: ±5% (J-grade)
- Dielectric: Polyester film (Mylar)
- Mounting: Through-hole, radial lead
- Lead spacing: 5mm
Applications
- Guitar tone circuits and passive pickup wiring
- Audio signal filtering and high-frequency noise suppression
- Vintage amplifier repair and restoration
- PCB decoupling in low-voltage industrial power supplies
Frequently Asked Questions
Is this capacitor suitable for guitar tone control wiring?
Yes. The 2A332JT is a standard radial polyester film capacitor used in passive guitar tone stacks. It is non-polarized and operates well within typical passive circuit voltage ranges.
Can this replace a polarized electrolytic capacitor?
No. This is a non-polarized film capacitor. It cannot substitute for a polarized electrolytic where polarity is required by the circuit design.
What is the lead spacing?
5mm — standard for the Laube 2A radial series. Verify your PCB footprint before ordering if working in a tight layout.
Is this an X or Y safety-rated capacitor for AC mains use?
No. This capacitor is not X/Y rated and is not suitable for direct connection across AC mains lines.
