Product Overview
900 MHz Sure Cross Wireless Capacitive Touch Indicator Node (GRY LEDs)
Condition
Unused NOS unit in excellent condition. Evaluation: Visual inspection only. Function testing not performed. Original packaging, mounting hardware, cables, and paperwork are not included. Source: contract manufacturer clearing out legacy stock.
Ships same business day from Idaho. Packed carefully.
Product Overview
The Banner K70DXN9T2GRYQ is a 900 MHz wireless industrial touch button that combines a capacitive touch input with Green/Red/Yellow LED indication. It is designed to operate as a node in a Banner Sure Cross DX80 wireless architecture, sending a touch event to the master device and receiving commands to change LED indication.
This model is intended for installations where running signal wiring is impractical, while still providing operator interaction and visual feedback through the wireless network.
Key Features
- Brand/Model: Banner K70DXN9T2GRYQ
- Radio frequency: 900 MHz ISM band (FHSS)
- Input type: Capacitive touch
- LED colors: Green / Red / Yellow
- Power requirement: 12–30 VDC
- Connector: 5-pin M12 (Euro-style) male quick disconnect
- Mounting: 30 mm threaded base
- Housing diameter: 70 mm
- Wireless range: up to 3.2 km / 2 miles line-of-sight
- System interface: Modbus RTU via wireless radio link (through compatible master/gateway)
Applications
- Wireless call button / call-for-parts stations
- Pick-to-light signaling in assembly and kitting
- Remote operator acknowledgment and status indication
- Cell or equipment status alerts where wiring is difficult
Frequently Asked Questions
Q: What system does this work with?
A: Banner Sure Cross DX80 architecture. It requires a compatible DX80 Gateway or a DXM Series Controller acting as the master/gateway.
Q: Will it work with 2.4 GHz Sure Cross networks?
A: No. This is a 900 MHz model and will not communicate with 2.4 GHz wireless gateways.
Q: Can it be used as a standalone wired touch button?
A: No. This model requires the wireless radio link for logic/communications and is not a standalone wired button.
Q: What power and cabling do I need?
A: Provide 12–30 VDC and a matching 5-pin M12 cordset (cordset not included).
Q: Do I need to unbind or reset it from a previous gateway?
A: It may need to be re-bound to your master/gateway during setup. Factory reset procedure is not confirmed.
Q: Will it work with heavy gloves?
A: Not confirmed. It is a capacitive touch device, so verify touch operation with your glove type.
