Product Overview
Banner R95 Series 8-Port Parallel M12 Junction Block - IP67/IP68, 30V DC, 4A, No LEDs
Condition
Unused NOS. Comes without original packaging or instruction sheet. Evaluation: Visual inspection only. Function testing not performed. Acquired from a contract manufacturer clearing surplus stock. Backed by our satisfaction guarantee.
Ships same business day from Idaho. Packed carefully.
Product Overview
Banner Engineering part number 813371, model R95-8M125-M125Q-P. Passive 8-port M12 sensor distribution block for consolidating multiple sensor cables into a single home-run connection. Eight female M12 5-pin A-coded ports wired in parallel to a single integral M12 5-pin male home-run connector. Rated for 10-30V DC systems. No communication protocol required - entirely passive.
Key Features
- 8 female M12 5-pin A-coded sensor ports
- Parallel internal wiring
- Integral M12 5-pin male home-run connector
- Voltage rating: 30V DC (10-30V DC operating range)
- Current rating: 4A maximum per block
- Environmental rating: IP67 and IP68 - washdown rated
- No LEDs - passive device, no status indication
- No fieldbus or IO-Link protocol required
Applications
- Consolidating proximity or photoelectric sensor cables on conveyor systems
- Simplifying sensor wiring on automated assembly machine cells
- Reducing home-run cable count in manufacturing panel builds
- Washdown and food-processing environments requiring IP67/IP68 rated hardware
Frequently Asked Questions
Is the home-run cable included?
No. A separate M12 5-pin male-to-female cable is required to connect the block to the controller or cabinet. This block ships without any cables.
What home-run connector does this block use - M12 or M23?
M12 5-pin male. This is confirmed for this model. Some larger junction blocks use an M23 connector; this R95 model does not. Verify your cabinet-side cable matches M12 before ordering.
Can this block be used in a safety circuit or series-wired application?
No. All ports are wired in parallel. Series wiring configurations - such as certain safety relay circuits - are not compatible with this block.
Does this model have port status LEDs?
No. The R95-8M125-M125Q-P is the non-LED variant. If per-port indicator LEDs are required, the R95-8M125-C1-D24P is an alternative model with LEDs and a hard-wired home-run cable.
Is this compatible with 3-pin M12 sensors?
Not confirmed - verify against datasheet before use. The block uses 5-pin M12 A-coded connectors. Physical mating with a 3-pin cable may be possible with an adapter, but electrical compatibility depends on the specific sensor and wiring configuration.
The R95-8M125-M125Q-P carries a confirmed IP68 rating, making it suitable for environments with intermittent submersion or high-pressure washdown. Verify current draw across all connected sensors does not exceed 4A total before installation.
